your trusted source for automotive paint and refinishing
Shopping Cart$0.00
0
PROUDLY CANADIAN
FREE GROUND SHIPPING ON ORDERS OVER $450
Sale!
NORTON 34771 GREY 6″ PRIER PREP SCUFF DISC
Norton Bear-Tex Thin-Flex Scuff Discs are an incredibly flexible, yet strong product. They are perfect for use on contoured surfaces and for getting into tight spaces. They can be used for fine finishing and surface preparation.
For dry sanding old paint, primer, primer surfacer, and
between-color coats; also for deburring, removing sand
scratches, shaping and finishing plastic filler, and featheredging
repaired areas. Special No-Fil coating prevents
premature loading. Can be cut into halves or thirds to fit neatly on jitterbug sanders.
For dry sanding old paint, primer, primer surfacer, and
between-color coats; also for deburring, removing sand
scratches, shaping and finishing plastic filler, and featheredging
repaired areas. Special No-Fil coating prevents
premature loading. Can be cut into halves or thirds to fit neatly on jitterbug sanders.
Mixing Tips by Evercoat®. Maxim™ Static Mixing Tips are designed to be used with Evercoat’s Maxim™ two-component products 812, 813,815, 816, 822, 823, 885, 886 887, and 898. If you’re looking for a quality product that will serve you for years to come, look no further.
Patterned, precise mineral structures give Trizact™ abrasives the combination of fast cut and consistent finish every time. Use P1000 foam blending discs for scuff sanding blend panels prior to painting. Use P1500 clearcoat sanding discs for leveling dust nibs and sanding of mismatched orange peel. Finally, use P3000 foam disc for removing P1200-P1500 grade sand scratches prior to use of 3M™ Perfect-It™ polishing system. Foam Trizact™ disc for use in scuff sanding blend panels before painting. Use with Hookit™ 6 inch Pad 05551, and Hookit™ Soft Interface Pad 05777.
SATA® RPS™ – The disposable cup system for mixing and painting
SATA RPS (Rapid Preparation System) is the ideal cup system for shops focusing on perfect finishes and high profitability.
One cup – four functions
mix paint
paint
refill the paint
store the paint
With only three components!
SATA RPS consists of 3 components only which means less handling efforts and thus, less expenditure of time.
a cup
a lid
a sieve
No additional components are necessary. There is no other cup system with the same functions but with three components only!
Economical
The cleaning of the cup is not necessary with SATA RPS, thus saving time, cleaning agents and cost. Perfect colour match and perfect paint jobs reduce time and cost intensive rework. And the very few components additionally facilitate the entire work process – simplicity pays.
Adapters
Contrary to other disposable cup systems, SATA RPS does not require any adapter in combination with SATA paint spray guns. Therefore, the spray gun can be easily and reliably cleaned. RPS adapters – For older SATA paint spray guns and spray guns of other manufactures spray gun adapters are available.
High performance strip abrasive for coarse, medium and fine sanding of polyester putty filler and paint materials. It has a dust repellent coating.
High performance abrasive for machine sanding surfaces. Stands out because of its good initial abrasiveness, its high durability and the very fine finish in higher grits.
Two-part urethane used to bond backup strips to SMC and FRP (traditional fiberglass). Fast work time for larger backup strips and patch applications. Longer work time that 08270. Work time = 3 minutes. Clamp time = 10 minutes. Cure time = 30 minutes
Champagne Magnum is sand paper technology at it’s best. It cuts faster, runs cooler, resists loading better and lasts far longer than any conventional sandpaper.
Premium heat-treated grain extends life and gives a 30 – 50% faster cut rate
Premium B-Weight latex paper backing improves performance, is more flexible and easier disc removal
FEPA P-graded grain achieves a more consistent uniform scratch pattern
Re-designed bond system optimizes grain adhesion and extends cut life
Newest water based stearate No-Fil improves load resistance
No pigment in No-Fil or bond eliminates the risk of color transfer and creates a much stronger bond
Abrasives
Reviews
There are no reviews yet.