Adhesives
Showing 1–18 of 44 results
-
Sale!
Adhesives3M 08475
3/8″x30 Seam Sealer TapeThe 3M 08475, 3/8″ Seam Sealer Tape is a rubber backed, .020 thick tape with a very conformable design which allows the technician to duplicate the factory appearance and function typically found in door jams, trunk gutters, and hem flanges. Paintable immediately and does not require the use of heat to set. Very conformable.
(0 reviews) -
Sale!Adhesives
3M 08115
Panel Bonding Adhesive, 200Ml SyringeTwo-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass). The primary use is to replace quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins. Use with Premium Manual Applicator 200ml 08117, 3M Static Mixing Nozzle 08193.
This product is also sold in our 400 ml size as SMC/FRP Repair – 90, 08274
(0 reviews) -
Sale!Adhesives
CARWORX 135.691
Seam & Joint Sealer- Black (300ML)Paintable in 30 minutes. Permanently flexible with no shrinkage. Withstands salt water and most solvents
(0 reviews) -
Sale!Adhesives
3M 80119
Weather Strip Adhesive- Flexible
- Fast strength buildup with good creep resistance
- Fast drying
- Resists oil, grease and solvents
- Not degraded by contact with most other chemicals
- Less than 4 minute work time
- Fully cured in 24 hours
- Paste-like consistency
3M™ Weatherstrip Adhesive is a black, fast-drying adhesive used for bonding and sealing automotive weather-stripping.
3M™ Weatherstrip Adhesive is a black-coloured, high heat-resistant adhesive that is waterproof and remains flexible. It has a fast strength buildup, helps to provide good creep-resistance and is intended to bond to a variety of rubbers, fabrics and metal. The adhesive is also excellent for bonding ethylene propylene diene (EPDM) rubber.
(0 reviews) -
Sale!Adhesives
CARWORX 135.693
Seam & Joint Sealer- White (300ML)Paintable in 30 minutes. Permanently flexible with no shrinkage. Withstands salt water and most solvents
(0 reviews) -
Sale!Adhesives
EVERCOAT 898
Multi-Fix Plastic RepairMaxim™ Multi-Fix plastic repair is a two component epoxy repair material that provides speed, incredible strength and sandability. This fast setting epoxy simplifies the plastic repair process by eliminating substrate identification and adhesion promoter. Multi-Fix is ideal for fixing tears, nicks and gouges in plastic parts and other quick fix applications.
(0 reviews) -
Sale!Adhesives
EVERCOAT 817
Mixing TipsMixing Tips by Evercoat®. Maxim™ Static Mixing Tips are designed to be used with Evercoat’s Maxim™ two-component products 812, 813,815, 816, 822, 823, 885, 886 887, and 898. If you’re looking for a quality product that will serve you for years to come, look no further.
(0 reviews) -
Sale!Adhesives
EVERCOAT 813
Maxim Medium Set AdhesiveExcellent gunability in hot and cold temperatures. Designed for replacing door skins, roofs, quarter panels, truck bedsides, utility vehicles sides, and other non-structural panels. Excellent adhesion for metal-to-metal, metal-to-SMC and SMC to SMC
(0 reviews) -
Sale!Adhesives
DOMINION 4008
Flexible Bumper Repair KitXPST Flexible Epoxy is a two-component flexible modified epoxy designed for the repair of flexible plastics. XPST is formulated to work on all flexible plastics including the more common (TPUR, PUR, RIM). XPST is also compatible with the traditional “tough to bond” plastics (PP, TPO, TPE). This product is designed as an adhesive and as a filler to be used on the front and backsides of a repair. XPST can also be used over our Urethane Repair material (XSMAF). XPST is an outstanding flexible filler that is commonly used as a glaze coat over all types of plastics due to its easy sanding and featheredging characteristics. XPST bonds, fills, and sands with outstanding performance. This flexible adhesive/filler is used and approved by automotive OEMs such as GM, Toyota, VW and many others. The “Original Plastic Surgery” as used by the professionals.
(0 reviews) -
Sale!Adhesives
CARWORX 330.071
Super Glue (3g)Area of application:
Excellent Adhesion for porous and non-porous surfaces.
Characteristics:
Sets quickly.
(0 reviews) -
Sale!Adhesives
NORTON 6419
Metal Door Skin BondingTwo-part epoxy (1:1) used to repair most plastic parts, including bumper covers and other plastic body panels including PP, fiberglass, Metton, Telene, SMC, TEO and urethane. Formulated to finish the front side of flexible repairs or used over the top of urethane adhesives. Incredibly easy to sand in 20 minutes or less. No plastic identification required. No adhesion promoter needed No tip needed-hand mix with a clean spreader. Work time: 1-2 mins Sanding Time: 15-20 mins Paint/Cure time: 60 mins.
(0 reviews) -
Sale!Adhesives
NORTON 4628
Speedgrip Mixing Tip• 24-element tips ensure automatic mixing for 220ml to 600ml
(0 reviews) -
Sale!Adhesives
3M 08463
Flexible Foam- 200ML3M™ Flexible Foam is a soft and flexible two-part urethane material which foams in place (closed-cell foam). It is designed to replace OEM’s flexible foams found on door intrusion beams, roof bows, inside body panels, pillars, and in other automotive body cavities. Expands to 10 times its original volumeto fill large cavities with a small amount of material. Can be used for OEM replacement of flexible foams to “pre-accident condition” as much as possible.
(0 reviews) -
Sale!Adhesives
3M 08458
Rigid Pillar Foam Cartridge- 200ML- A high-performance, two-component rigid urethane closed-cell foam offers delayed reaction time
- Foam fills posts, pillars, and other automotive body cavities to prevent panel flutter or provide rigidity
- Expanding properties of foam fill hard-to-reach cavities
- Foam replicates appearance and performance of many OEM products
- Easy to apply with 3M™ Automix™ Applicator Gun
3M™ Rigid Pillar Foam is a two part urethane which foams in place to fill posts, pillars, and automotive body cavities with exceptional ease and consistent quality. This foam is easily to apply with a range of manual and pneumatic 3M applicators.
(0 reviews) -
Sale!Adhesives
3M 08308
Heavy- Bodied Seam SealerThe 3M 08308, Automix Heavy-Bodied Seam Sealer is a two-part epoxy seam sealer for use in sealing vertical or horizontal seams to match OEM sealers. It is non-sagging, non-flowing, and easy to tool. Paintable in 30 minutes, worktime is 10 minutes. No shrinkage or cracking. Beads will remain the same size and shape as extruded. Will cure in about 1 hour. Will need 3M # 08117 Applicator Gun.
(0 reviews) -
Sale!Adhesives
3M 08219
SMC/Fibreglass 35min Repair AdhesiveThe 3M 8219, Automix / Fiberglass Repair Adhesiveis a two-part urethane adhesive that is used to bond SMC and FRP (traditional fiberglass) body panels to each other and to metal. It is designed to bond composite and metal to each other, along with metal to metal applications. Requires 3M 08117, Applicator Gun to apply.
(0 reviews) -
Sale!Adhesives
3M 08116
Automix Panel Bonding AdhesiveTwo-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass). The primary use is to replace quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins. Meets GM 6449G & Chrysler MS-CD 507.
(0 reviews) -
Sale!Adhesives
3M 08193
Nozzles For 200ML Cartidges3M Nozzles for 200 mL Cartridges efficiently mix a variety of 3M two-component products such as adhesives, sealers and foams. Nozzles work easily with two-component cartridges
(0 reviews)
