3M™ Green Corps™ Roloc™ Disc, 50 grade, 3 inch, 01406 is generally used for hard to reach areas in paint, rust, and weld removal. Handy quick change tool for disc grinding which fits any standard 1/4 in drill or air tool. Recommended back up pad 05540. Green button.
3M™ Automotive Acrylic Plus Attachment Tape 06386 is a .045-inch thick, medium-density black foam tape with high performance acrylic adhesives on both sides and a red release liner.
Acrylic Plus Attachment Tapes are OEM approved and are stronger, higher performing, high stress handling products than other automotive attachment tapes. Typical application areas for 06386 include body side moldings, claddings, rocker panel trim, wheel flares, bumper time and other exterior and interior autmotive trim components.
Two-part urethane used to bond backup strips to SMC and FRP (traditional fiberglass). Fast work time for larger backup strips and patch applications. Longer work time that 08270. Work time = 3 minutes. Clamp time = 10 minutes. Cure time = 30 minutes
For dry sanding old paint, primer, primer surfacer, and
between-color coats; also for deburring, removing sand
scratches, shaping and finishing plastic filler, and featheredging
repaired areas. Special No-Fil coating prevents
premature loading. Can be cut into halves or thirds to fit neatly on jitterbug sanders.
Automotive Refinish Masking Tape is designed for masking before painting — it bends and stretches to follow curved body lines with no edge lifting, leaves sharp paint lines, removes easily with no adhesive transfer. Waterborne paint compatible.
Epoxy Panel-Bonding Adhesive Two-part epoxy adhesive designed to bond SMC, FRP, fiberglass, steel and aluminum auto parts and body panels to each other and to metal frames (no primer required). • Minimal odor • Glass beads for proper spacing • Easy to sand formulation • Paintable • Seals and bonds in one step
XPSAP Semi-Rigid Epoxy is a two-component semi rigid modified epoxy designed as an “ALL PURPOSE” plastic repair material. XPSAP’s unique formulation allows you to use this product on the full spectrum of automotive plastics. When in doubt on which type of plastic (flexible, semi-rigid, or rigid) you are repairing use XPSAP. XPSAP is formulated to work on all plastics including the more common and also the traditional “tough to bond” plastics (TPUR, PUR, RIM, PP, TPO, TPE). This product is designed as an adhesive and filler to be used on the front and backsides of a repair. XPSAP can also be used over our Urethane Repair material (XSMAP, XSM11000). XPSAP is an outstanding Semi-Rigid filler that is commonly used as a glaze coat over all types of plastics due to its easy sanding and featheredging characteristics. XPSAP may also be used as a multipurpose adhesive. Some areas of use include: door skins (metal and plastic), rusted patch panels, backer panels (metal, SMC, Fiberglass, and Rigid Plastics), ground effects, etc. XPSAP bonds, fills, and sands with outstanding performance. This semi-rigid adhesive/filler is used and approved by automotive OEMs such as GM, Toyota, VW and many others. The “Original Plastic Surgery” as used by the professionals
Abrasives
